Configuring Common Services For Incoming Traffic - Watchguard Firebox X15 User Manual

Configuring Firewall Settings

Configuring common services for incoming traffic

The Firebox X Edge includes standard services known as common
services that you can use to control traffic through the Firebox. You
can use the procedure below to configure the properties of a com-
mon service.
For more information on common services, refer to the list at the
end of this FAQ:
www.watchguard.com/support/Tutorials/stepsoho_blockoutservice.asp
1
To connect to the System Status page, type https:// in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1
2
From the navigation bar, select Firewall > Incoming.
The Filter Incoming Traffic page appears.
3 Find the common service to allow into your trusted or optional
network from the external network. From the Filter drop-down
list adjacent to the service name, select Allow or Deny.
By default, the Firebox does not allow incoming traffic to your network.
106 WatchGuard Firebox X Edge