The Zonealarm Personal Firewall; Allowing Traffic Through Zonealarm - Watchguard Firebox X15 User Manual

- for a connection to a secure gateway tunnel
- when a phase 2 SA connection has not been made at this time
- when a phase 2 SA connection cannot be made
• A key tells you that the connection has a phase 2 SA. This
connection can also have a phase 1 SA.
• An animated black line below a key tells you that the client is
sending or receiving secure IP traffic.
• A single SA icon with more than one key icon above it shows a
single phase 1 SA to a gateway that protects more than one
phase 2 SAs.

The ZoneAlarm Personal Firewall

ZoneAlarm® Personal firewall protects your computer and network
with a simple rule: Block all incoming and outgoing traffic unless
you explicitly allow that traffic for trusted programs.
When you use ZoneAlarm, you frequently see New Program alert
windows. This alert appears when a software application tries to get
Internet or local network access. This alert stops data from your
computer without your authorization.
The ZoneAlarm personal firewall includes a tutorial after the
MUVPN client is installed. Read the tutorial to learn how to use this
software application.
For more information about the features and configuration of
ZoneAlarm, use the ZoneAlarm help system. To get access to the
help system, select Start > Programs > Zone Labs > ZoneAlarm
Help.

Allowing traffic through ZoneAlarm

When a software application tries to get access through the
ZoneAlarm personal firewall, a New Program alert appears. This alert
tells the user the name of the software application. This can cause
confusion for users.
To let a program get access to the Internet each time the software
application is started, select the Remember the answer each time I
use this program check box.
User Guide
The ZoneAlarm Personal Firewall
211