Watchguard Firebox X15 User Manual page 116

Firebox X Edge Wireless Setup
To set up a wireless connection using Windows XP SP2:
1
Click Start > Settings > Control Panel > Network
Connections.
The Network Connections dialog box appears.
2
Right-click Wireless Network Connection and select
Properties.
The Wireless Network Connection dialog box appears.
3 Select the Wireless Networks tab.
4
Below Preferred Networks, click Add.
The Wireless Network Properties dialog box appears.
5
Type the SSID in the Network Name (SSID) text box.
6
Select the network authentication and data encryption methods
from the drop-down lists.
If necessary, clear the check box labeled
automatically
7 Click OK to close the Wireless Network Properties dialog box.
8
Click the View Wireless Networks button.
All available wireless connections appear in the Available Networks text
box.
9
Select the SSID of the wireless network and click Connect.
If the network uses encryption, type the network key twice in the
Wireless Network Connection dialog box and click
10 Configure the wireless computer to use DHCP. For more
information about how to configure DHCP, see "Setting Your
Computer to Connect to the Edge" on page 22.
The Firebox X Edge Wireless is configured to protect the wired and
wireless computers that are attached to it from security risks.
102
and type the network key two times.
The key is provided for me
Connect
again.
WatchGuard Firebox X Edge