Preparing Remote Computers For Muvpn - Watchguard Firebox X15 User Manual

Give these two files to the remote user
Give the MUVPN software, and the .wgx file to the remote user. You
must also give the user the shared key you used when you enabled
the Firebox User account to use MUVPN, as described in "Enabling
MUVPN for Edge Users" on page 193. The user uses this shared key
at the end of the installation process.
The shared key is highly sensitive information. For security
reasons, we recommend that you do not give the user the shared
key in an e-mail. Because e-mail is not secure, an unauthorized
user can get the shared key. Give the user the shared key by telling
it to the user, or by some other method that does not allow an
unauthorized person to get the shared key.

Preparing Remote Computers for MUVPN

You can install the MUVPN client only on computers that have these
minimum requirements:
• A computer with a Pentium processor (or equivalent)
• Compatible operating systems and minimum RAM:
- Microsoft Windows NT 4.0 Workstation: 32 MB
- Microsoft Windows 2000 Professional: 64 MB
- Microsoft Windows XP: 64 MB
• No other IPSec VPN client software can be on the computer.
Remove any other software from the user's computer before you
try to install the WatchGuard MUVPN software.
User Guide
Preparing Remote Computers for MUVPN
N
OTE
197