Watchguard Firebox X15 User Manual page 219

4
Click Next.
If the InstallShield shows a message about read-only files, click
continue the installation.
5
A welcome message appears. Click Next.
The Software License Agreement appears.
6
Click Yes to accept the license agreement.
The Setup Type window appears.
7
Select the type of installation. WatchGuard recommends that
you use the Typical installation. Click Next.
8
On a Windows 2000 computer, the InstallShield looks for the
Windows 2000 L2TP (Later 2 Tunneling Protocol) component. If
the component is installed, the InstallShield does not install it
again. Click OK to continue.
The Select Components window appears.
9
Do not change the default selections. Click Next.
The Start Copying Files window appears.
10 Click Next to install the files.
A command prompt window appears during the installation. The
command prompt can stay for more than one minute. This is usual. After
the file is installed, the command window closes automatically and the
installation continues.
11 After the installation is complete, click Finish.
12 The InstallShield wizard looks for a user profile. Use the Browse
button to find and select the folder containing the .wgx file.
Click Next.
You can click Next at this step if you do not have the .wgx file at this
time. You can import the .wgx file later. To import a .wgx file after the
software is installed, double-click the .wgx file and type the shared key.
13 Click OK to continue the installation.
14 The MUVPN client is installed. Make sure the option Yes, I want
to restart my computer now is selected. Click Finish.
The computer restarts.
The ZoneAlarm personal firewall could prevent you from
connecting to the network after the computer restarts. If this
occurs, log on to the computer locally the first time after
installation. For more information, see "The ZoneAlarm Personal
Firewall" on page 211.
User Guide
Installing and Configuring the MUVPN Client
N
OTE
Yes
to
205