Setting Authentication Options For All Users - Watchguard Firebox X15 User Manual

Managing Users and Groups
session, and which options are available to customize authentica-
tion.
Three levels of Administrative Access are available for the Edge:
• None: Use this to connect to resources on the external network.
A user who uses this access level cannot see or change the Edge
configuration pages.
• Read-Only: Use this to see Edge configuration properties and
status. A user who uses this access level cannot change the
configuration file.
• Full: Use this to see and to change Edge configuration
properties. You can also activate options, disconnect active
sessions, restart the Edge, and add or edit user accounts. A user
who uses this access level can change the passphrase for all user
accounts.

Setting authentication options for all users

Some authentication options apply to all users. To set or change
authentication options:
1
To connect to the System Status page, type https:// in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1
2
From the navigation bar, select Firebox Users > Settings.
The Settings page appears.
138 WatchGuard Firebox X Edge