If Your Isp Uses Pppoe - Watchguard Firebox X20E User Manual

Configuring the External Network
Type the IP address, subnet mask, default gateway, primary DNS, secondary DNS, and DNS
3
domain suffix into the related fields. Get this information from your ISP or corporate network
administrator. These DNS settings are used when the Edge must find the IP address of a domain.
If you completed the table on "Identifying Your Network Settings" on page 11, type the
information from the table.
Click Submit.
4

If your ISP uses PPPoE

If your ISP uses PPPoE, you must enter the PPPoE information into your Firebox X Edge before it can
send traffic through the external interface. For more information in PPPoE, see "About PPPoE" on
page 4.
To set your Firebox to use PPPoE on the external interface:
Use your browser to connect to the System Status page. From the navigation bar, select
1
Network > External.
The External Network Configuration page appears
From the Configuration Mode drop-down list, select PPPoE Client.
2
Type your name and password in the related fields. Get this information from your ISP. If your ISP
3
gives you a domain name, type it into the Domain field.
Most ISPs that use PPPoE make you use the domain name and your user name. Do not include
the domain name with your user name like this: myname@ispdomain.net. If you have a PPPoE
name with this format, type the myname section in the Name field. Type the ispdomain section
in the Domain field. Do not type the @ symbol. Some ISPs do not use the domain.
56
.
Firebox X Edge e-Series