Windows Xp Setup - Watchguard Firebox X15 User Manual

Configuring the MUVPN Client
8
Type the IP address of the WINS server in the applicable field.
Click Add.
To add more WINS servers, repeat steps 7 and 8.
9 Click OK to close the Advanced TCP/IP Settings window. Click
OK to close the Internet Protocol (TCP/IP) Properties window.
10 Click OK to close the connection properties window.

Windows XP setup

Use this section to install and configure the network components
for the Windows XP operating system. You must install these com-
ponents if you use the MUVPN client on a Windows XP computer.
From the Windows desktop:
1 Select Start > Control Panel
The Control Panel window appears.
2
Double-click the Network Connections icon.
3
Right-click the connection you use to get Internet access and
select Properties.
The connection properties window appears.
4
Make sure these components are installed and enabled:
To enable a component, click the adjacent check box. If a component is
not installed, follow the instructions to install it.
- Internet Protocol (TCP/IP)
- File and Printer Sharing for Microsoft Networks
- Client for Microsoft Networks
Installing the Internet Protocol (TCP/IP) Network
Component
From the connection window Networking tab:
1
Click Install.
The Select Network Component Type window appears.
2
Double-click the Protocol network component.
The Select Network Protocol window appears.
3
Below the Microsoft manufacturer, select the Internet Protocol
(TCP/IP) network protocol and click OK.
202 WatchGuard Firebox X Edge