Navigating The Configuration Pages - Watchguard Firebox X15 User Manual

Navigating the Firebox X Edge Configuration Pages

Navigating the Configuration Pages

You use the configuration pages for all procedures to configure the
Firebox® X Edge. The System Status page, the primary navigation
page, appears below.
In this User Guide, most procedures start with this step:
"To connect to the System Status page, type https:// in the
browser address bar, and the IP address of the Edge trusted inter-
face. The default URL is: https://192.168.111.1."
This opens your Firebox system configuration pages. You can
change the IP address of the trusted network from 192.168.111.1 to
a different IP address if necessary. For more information, see "Con-
figuring the Trusted Network" on page 66.
For example, if you use Internet Explorer as your primary browser:
1
Start Internet Explorer.
2
Click File > Open, type https://192.168.111.1 in the text
box adjacent to the word Open, and then click OK.
You can also type the URL directly into the address bar and press the
Enter key.
30 WatchGuard Firebox X Edge