Watchguard Firebox X15 User Manual page 93

3
Click Add.
The Add Route page appears.
4
From the Type drop-down list, select Host or Network.
This box tells if the destination for the static route is one computer or a
network of computers.
A host is one computer. A network is more than one computer
using a range of IP addresses.
You must type network addresses in "slash" notation (also known
as CIDR, or Classless Inter Domain Routing, notation). Do not type
a slash for a host IP address. For more information on how to
enter IP addresses in slash notation, refer to this FAQ:
http://watchguard.com/support/advancedfaqs/general_slash.asp
5
Type the destination IP address and the gateway in the related
fields.
The gateway is the local interface IP address of the router. The gateway
IP address must be in the Firebox's trusted, optional, or external network
range.
6
Click Submit.
To remove a static route, click the IP address and click Remove.
User Guide
N N
OTE OTE
Making Static Routes
79