Navigating The Firebox X Edge User Interface - Watchguard Firebox X20E User Manual

Navigating the Firebox X Edge User Interface

This warning will appear each time you use HTTPS to connect to the Firebox X Edge unless you
permanently accept the certificate.
Enter your user name and password to authenticate.
4
The System Status page appears.
If necessary, you can change the Firebox X Edge so that it uses HTTP connections for web management
connections instead of HTTPS. HTTP is less secure, because any information you send to the Firebox is
unencrypted. We recommend that you always use HTTPS to configure the Firebox X Edge. For more
information, see "Selecting HTTP or HTTPS for Management" on page 42.
Navigating the Firebox X Edge User Interface
On the left side of the System Status page is the navigation bar you use to get to other Firebox® X Edge
configuration pages.
22 Firebox X Edge e-Series