3
INSTALLATION
3.1
Unpacking
Check outer package for damage and that the delivery note corresponds to the purchase order.
Note : The EtherCAT Interface is implemented into the STP control unit by Edwards
Note : It is recommended to keep the packaging materials, such as the corrugated fibreboard
container and cushioning material for possible re-use. If the product is damaged, return it in
its original package and contact Edwards or their distributor.
3.2
Precautions before installation
Read this manual and the STP control unit manual before you attempt to install, operate or
3.3
EtherCAT Interface panel
Figure 2 shows the connectors and indicators present on the EtherCAT Interface.
1
3
2
4
5
9
STP EtherCAT
CAUTION
maintain.
7
8
4
6
10
Figure 2 - User interface of EtherCAT Interface
®
Interface
1.
RUN indicator (green)
2.
Mini USB sccket
3.
ERROR indicator (red)
4.
PWR(Power) indicator (green)
5.
In link activity indicator (green)
6.
Out link activity indicator (green)
7.
x10 DEVICE ID Rotary Switch (most
significant switch)
8.
x1 DEVICE ID Rotary Switch (least
significat switch)
9.
IN port
10. OUT port
3
MT-49E-A01-E
Page 7