Kustom Signals Golden Eagle II Operator's Manual page 47

3. Complete a tracking history on the target vehicle.
A. Observe the target and surrounding traffic.
B. Estimate the speed of the target vehicle.
*C. Depress the appropriate FRNT/HOLD or
REAR/HOLD switch to turn the microwave
transmitter on.
D. Listen to the pitch of the audio; it should correspond
to the estimated speed.
E. Observe the speed reading shown in the Golden
Eagle's II's TARGET window. It should
correspond with B and D above.
F. If any of the above elements are incompatible, the
reading must be disregarded.
* Use the HOLD feature to defeat radar detectors.
4. If the operator wishes to lock (retain) the violator's
speed, simply depress the LOCK/REL switch on either
the front panel or the remote control. A short alert tone
will be heard when the internal tests are complete and
the target speed will be displayed in the LOCK
window.
5. The Golden Eagle II will continue to track the violator's
speed in the TARGET window as long as the vehicle is
in the antenna beam.
6. If the operator switches to the opposite antenna while
Locked, the road graphic indicator for the selected
antenna at the time of lock will flash and the newly
selected antenna indicators will be on solid. If the
operator changes back to the original antenna, the
original antenna indicator will light steady.
NOTE: If the auto-unlock feature is enabled, the
locked speed will be automatically unlocked after
14 minutes.
Section 7--System Operation
7.6