Kustom Signals Golden Eagle II Operator's Manual page 52

8. The operator may blank the locked patrol speed display
window, during lock, by depressing the PAT/SEL
switch. Depressing the switch again will return the
locked PATROL display.
9. To manually unlock or clear the locked speeds, depress
the LOCK/REL switch. This will clear the LOCK and
locked PATROL windows.
NOTE: If the auto-unlock feature is enabled, the
locked speeds will be automatically unlocked after
14 minutes.
10. If the operator changes the mode of operation, such as
moving to stationary, opposite to same direction, etc.,
the locked speeds will be automatically unlocked and
cannot be recalled.
Depressing the TEST switch will allow the Golden
Eagle II to complete a display and internal test then
return the locked speed.
If the antenna was changed to track the target vehicle
after it passed the patrol vehicle, the road graphic
indicators will flash the antenna selected at the time of
lock. All locked speeds will be retained.
11. If the remote control is damaged or lost, refer to Section
4.2.0 for default operation of the Golden Eagle II
without a remote control.
Section 7--System Operation
7.11