Kustom Signals Golden Eagle II Operator's Manual page 19

Section 3—Inspection & Mounting
3.2.4. Speedometer Pulse Cable Installation
Installing the provided cable to the vehicle's speed sensor
(VSS) provides a signal to the Golden Eagle II for Kustom
Signals patented Tru-Trak assisted patrol speed search
feature. This feature virtually eliminates the problems of
patrol shadowing and patrol combining. This signal also
allows the unit to automatically switch between moving
and stationary modes as the vehicles movement is sensed.
1. The speedometer pulse cable has a two-conductor plug
at one end and no plug at the other end. The plug
connects into the "SPDOMTR" connector on the rear
panel of the processing unit.
2. The bare end of the speedometer pulse cable will be
connected to the patrol vehicle's electrical speedometer
input cable using the splice connector provided. Due to
the vast number of models, makes and years of vehicles
we have moved access to specific vehicle diagrams
online, where information can be better maintained and
distributed.
Installation details can be accessed at:
http://www.kustomsignals.com
(select: radar fixed mount)
For information on connecting the TruTrak cable, refer
to the Kustom website above. For information
regarding motorcycle mounts, refer to instructions in
the mount kits.
If your vehicle year, make and/or model is not listed or
you need hard copies, please contact Kustom's
Customer Service Department at (800) 835-0156. If
you are outside of the US and Canada, please call (620)
431-2700.
NOTE: Only the inner conductor of the speedometer pulse
cable is used. The outer shield is not connected.
3.8