Stationary Operation - Kustom Signals Golden Eagle II Operator's Manual

7.2.

Stationary Operation

The antennas of the Golden Eagle II are set up separately
and independently. To change the mode of an antenna it
must be selected with either the FRNT/HOLD or
REAR/HOLD switch.
1. Select one of the antennas by pressing either the
FRNT/HOLD or REAR/HOLD switch. Place the unit
in the stationary mode by depressing the MODE switch
if necessary, observing that both direction
mode/antenna indicators are lit for stationary operation.
Set range to the desired level. (Level 1, targets must be
very close before the Golden Eagle II will display the
target's speed, Level 6, maximum range.)
Select
Antenna
FRNT
HOLD
REAR
HOLD
*2. If desired, turn the microwave transmitter off by
depressing the appropriate FRNT/HOLD or
REAR/HOLD switch. "Hld" will be displayed in the
TARGET window.
Section 7--System Operation
Select
Stationary
MODE
7.5
or