Moving Operation (Opposite Direction) - Kustom Signals Golden Eagle II Operator's Manual

7.3.

Moving Operation (Opposite Direction)

There are two modes of moving operation:
1) Moving Opposite Direction.
2) Moving Same Direction.
The antennas of the Golden Eagle II are set up separately
and independently. In this way, if the operator chooses, the
front antenna can be set to one mode (Moving Opposite
Direction) and the rear antenna can be set to a different
mode (Moving Same Direction).
To change the mode of an antenna it must be selected with
either the FRNT/HOLD or REAR/HOLD switch.
1. Select one of the antennas by pressing either the
FRNT/HOLD or REAR/HOLD switch. Place the
Golden Eagle II in moving mode operation by
depressing the MODE switch and observe the road
graphic indicators. The patrol and an opposite direction
indicator should be lit. If a same direction indicator is
on, depress the SAME/OPP switch on the remote
control.
Select
Antenna
FRNT
HOLD
REAR
HOLD
2. Set the minimum patrol speed to the desired level--10
or 20 MPH (16 or 32 km/h). To set this option, press
the PAT/SEL switch once. The TARGET window will
display "PAt" and the current minimum patrol setting,
either 10 or 20 will appear in the PATROL window.
This display will be active for two (2) seconds unless
another switch is pressed. To change the displayed
minimum speed, press the MODE switch, which will
toggle between the two speeds.
Section 7--System Operation
Select
Moving
MODE
7.9
Select
Opposite
SAME
OPP
or