Table of Contents
Advertisement
A. LOCK-RELEASE
(Start-Stop-Clear
in stopwatch mode)
B. FRONT HOLD
C. FAST/SLOW
(FASTEST/
SLOWER)
Section 4—Unit Description
This switch is used for locking
and releasing target and patrol
speeds. In the stopwatch mode
will start, stop and clear the
timer.
This switch used to turn the front
antenna microwave transmitter on
and off. If the rear antenna is
active, it will be placed in Hold
and the front antenna will become
active.
This switch is used in opposite
direction or stationary mode to
activate fastest target feature. In
same direction mode, used to tell
the microprocessor that the
target vehicle is slower than the
patrol vehicle.
NOTE: If the antenna label
reads "DCM" the radar will
automatically determine if the
target vehicle is traveling slower
or faster. Thus the display will
automatically display the correct
target vehicle speed and the use
of the SLOWER button is
unnecessary.
NOTE: Fastest can be operated
in one of two methods. See
Section 13 (Options) for details.
4.6
Advertisement
Table of Contents
