Table of Contents
Advertisement
Section 12—Troubleshooting
Intermittent
Readings
Fan interference
Sometimes caused by multiple
targets traveling at or near the same
speed.
Verify the range control setting.
Target vehicle may be out of range
of radar.
Verify there are no obstructions
between the radar and the target.
Moving mode - verify proper patrol
speed is being displayed.
Target speed may be a harmonic
(same speed) as the patrol speed
(moving mode). Change patrol
speed 2 or 3 mph.
Weather conditions (heavy rain,
snow or fog) may affect the Golden
Eagle II's ability to pick up proper
groundspeed or the target vehicle.
Verify vehicle electrical influences.
(See "Short Range" listed above).
Place unit in stationary mode.
Unsquelch audio and turn audio to
mid-range value. Set range control
to level "6". Listen for fan noise in
audio. See Sec. 3.2.2, 3.2.3 and 7.8
for antenna mounting and possible
antenna pads to reduce fan noise.
12.8
Advertisement
Table of Contents
