Kustom Signals Golden Eagle II Operator's Manual page 18

Section 3—Inspection & Mounting
3.2.3. Rear Antenna Mounting
1. Place the antenna on the rear-mounting bracket.
2. Follow the procedure for determining any fan
interference per Section 3.2.2, steps 4-6. Set the
Golden Eagle II for stationary mode, rear antenna.
3. After the optimum position has been located (and
marked per 3.2.2 step 6), permanently attach the mount
to the rear window using the adhesive provided.
4. Position the antenna cable behind the rear seat and under
the rear floorboard, then route up to the logic unit and
connect. This method of mounting will minimize the
antenna from moving around in the vehicle should it
break loose in an accident. It should also prevent
anyone from using the cable as a weapon against the
officer.
5. Position the antenna parallel to the ground and aimed
straight down the roadway.
Stationary Mode
Rear Antenna
3.7