Kustom Signals Golden Eagle II Operator's Manual page 15

Section 3—Inspection & Mounting
3.2.2. Front Antenna Mounting
Provided with the Golden Eagle II is a windshield mount
for the antenna. Contact your District Sales Manager or
Kustom Signals' Customer Service department for other
optional antenna mounts.
NOTE: Mounting of the antenna bracket to the
dashboard or any metal bracket (such as the
radio rack) may cause improper grounding of the
antenna. This would be noticed by reduced range
and/or a high-pitched squeal in the audio. Use of
the Kustom Signals' isolation kit, P/N 050-0200-00
will eliminate improper grounding.
1. Attach the antenna to the provided mount.
2. Use the provided antenna cable to connect the antenna
to the processing unit, front antenna port. Refer to Sec.
4.1 for antenna port location.
3. Connect the processing unit's power connector to the
proper power source. See Sec. 3.2.0.
4. Momentarily depress the POWER switch on the front
panel of the Golden Eagle II (refer to Section 4.0 for
location and function of front panel switches). It will
process through a lamp test and internal test as
described later in Section 6. Select Stationary mode by
depressing the MODE switch, if necessary. Both
direction antenna/mode indicators (front antenna) will
be lit.
Stationary Mode
Front Antenna
3.4