Table of Contents
Advertisement
12. TROUBLESHOOTING
If an operating difficulty is encountered, check the
following list of possible problems and solutions before
returning the unit to the factory or local Service Center.
Problem
No Power Indication
Unit will not complete
test cycle or shows Err
message
Section 12—Troubleshooting
Possible Solution
Check for proper voltage at
cigarette plug. If indicators
momentarily flash, problem may
be an over current condition.
Disconnect all antennas. If
problem still exists, remove unit
from service.
Reseat the cigarette plug in the
socket.
Check fuses if using vehicle's
cigarette socket.
If the display unit is separated
from the processing unit, verify
the interconnect cable is
connected properly.
Remove unit from service.
Record error.
12.1
Advertisement
Table of Contents
