BORETTI CFBG902AN3 Instruction On Mounting And Use Manual page 70

* Insert the feeder cable into the cable clamp "D". The supply cable must be
of a suitable size (see the section "Feeder cable section").
* Connect the phase and earth cables to terminal "B" according figures
10.2a, 10.2b, 10.2c.
* Pull the feeder cable and block it with the cable clamp "D".
* Re-mount shield "A".
N.B.
The earth conductor must be left about 3 cm longer than the others.
Feeder cable section Type "H05RR-F"
230 V ac 3 x 2,5 mm
400 V 2N ac 5 x 1,5 mm
400 V 2N ac 4 x 1,5 mm
(*) – Connection with wall box connection
(*)
2
(*)
2
(*)
2
68