Table of Contents
Advertisement
Available languages
Available languages
8 Installation
Installation
This cookers has class "2/1" overheating protection so that it can be
installed in a cabinet.
The appliance must be kept no less than 200 mm away from any side wall
which exceed the height of the hob surface (fig. 8.1).
The furniture walls adjacent to the cooker must be made of material
resistant to heat.
The veneered syntetical material and the glue used must be resistant to a
temperature of 90°C in order to avoid ungluing or deformations.
The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room
but not in a room containing a bath or shower.
Curtains must not be fitted immediatly behind appliance or within 500 mm
of the sides.
It is essential that the cooker is positioned as stated below.
The cooker must be installed by a qualified technician and in compliance
with a local safety standards.
Fig. 8.1
48
Advertisement
Table of Contents
