BORETTI CFBG902AN3 Instruction On Mounting And Use Manual page 34

Fig. 6.1
Electronic clock
(fig. 6.2)
The programmer is equipped with an electronic clock with illuminated
numbers which indicates hours and minutes. Upon immediate connection
of the oven or after a power cut, three zeros will flash on the programmer
display. To set the correct time of day it is necessary to push the
and then the or
In another way push simultaneously the
same time push the
Note:
If the clock is reset it deletes any previously set programs
Normal cooking without the use of the programmer
To manually use the oven, without the
aid of the programmer, it is necessary
to cancel the flashing AUTO by
pushing the button (AUTO will be
switched off and the symbol
illuminate - fig. 6.3). Attention: If the
AUTO is illuminated (which means a
cooking program has already been
inserted), by pushing the button
you cancel the program and return to
manual operation. If the oven is switched on, you must switch off manually.
Fig. 6.2
button until you have set the correct time (fig. 6.2).
or button.
will
Fig. 6.3
32
button
two buttons and at the