Semi-Automatic Cooking - BORETTI CFBG902AN3 Instruction On Mounting And Use Manual

Semi-automatic cooking

This is used to automatically switch off the oven after the desired cooking time
has elapsed.
There are two ways to set your oven:
1. Set the length of the cooking time by pushing the
button to advance, or
time (fig. 6.7).
2. Set the end of the cooking time by pushing the
to advance, or
(fig. 6.8).
AUTO and the symbol will be on.
Then set the temperature and the cooking programme using the oven switch
and thermostat knobs (see specific chapters).
The oven is switched on and it will be switched off automatically at the end
of the desired time.
During cooking, the
you can see the time that remains till the end of the cooking.
The cooking program may be cancelled at any time by pushing
At the end of the cooking time the oven will turn off automatically, the
symbol will turn off, AUTO will flash and a buzzer will be sound, which can
be turned off by pushing any of the buttons except the
Turn the switch and thermostat knobs to zero and put the programmer onto
"manual" by pressing the
Attention:
After a power cut the clock resets to zero and cancels the set programs.
After a power cut, three zeros will flash on the display.
Fig. 6.7
to go backwards if you have passed the desired
or
to go backwards if you have passed the desired time
symbol remains on and by pressing the button
button.
35
button and the
button and the
/ buttons.
Fig. 6.8
button
.