Storage Compartment - BORETTI CFBG902AN3 Instruction On Mounting And Use Manual

Storage compartment

The storage compartment is accessible through the pivoting panel (fig. 7.14a).
Do not store flammable material in the oven or in the storage compartment.
Replacing the oven lamp
Warning
Ensure the appliance is switched off and disconnected from the electrical
power supply before replacing the lamp to avoid the possibility of electric
shock.
* Let the oven cavity and the heating
elements to cool down.
* Switch off the electrical supply.
* Remove the protective cover "A"
B
(fig. 7.14b).
B
* Replace the halogen lamp "C" with a
new one suitable for high temperatures
A
(300°C) having the following
A
specifications: 230V, 50 Hz and same
power (check watt power as stamped
in the lamp itself) of the replaced lamp.
Important warning
Never replace the bulb with bare hands; contamination from your
fingers can cause premature failure. Always use a clean cloth or gloves.
* Refit the protective cover.
Note
Oven lamp replacement is not covered by your guarantee.
C
INCORRECT
WRONG
C
A
CORRECT CORRECT
A
44
Fig. 7.14a
Fig. 7.14a
WRONG
WRONG
CORRECT CORRECT
Fig. 7.14b
Fig. 7.14b