BORETTI CFBG902AN3 Instruction On Mounting And Use Manual page 51

Backguard | Some models only
Before installing the cooker, assemble the backguard "C" (fig. 8.2).
* The backguard "C" can be found packed at the rear of the cooker.
* Before assembling remove any protective film/adhesive tape.
* Remove the two spacers "A" and the screw "B" from the rear of the cooktop.
* Assemble the backguard as shown in figure 8.2 and fix it by screwing the
central screw "B" and the spacers "A".
C
B
A
Fig. 8.2
Fitting the adjustable feet
The adjustable feet must be
fitted to the base of the cooker
before use.
Rest the rear of the cooker
an a piece of the polystyrene
packaging exposing the base
for the fitting of the feet.
49