UPS5000-E-(60 kVA-160 kVA)
User Manual (Low Voltage)
●
Step 4 Reinstall the cabinet rear panel.
Step 5 Adjust the cabinet so that the expansion bolt mounting holes are aligned with the
eight holes at the bottom of the cabinet.
Step 6 Secure the two antiseismic kits at the front and rear of the cabinet to the floor
using eight M12 expansion bolts, as shown in
Issue 05 (2024-01-30)
Figure 3-15 Securing the antiseismic kits to the cabinet (with a marking-off
template)
(Without a marking-off template) Use eight M6x20 and four M12 screws.
Figure 3-16 Securing the antiseismic kits to the cabinet (without a marking-
off template)
Copyright © Huawei Digital Power Technologies Co., Ltd.
Figure
3-17.
3 Installation
67