Huawei UPS5000-E-60K-F60 User Manual page 124

UPS5000-E-(60 kVA-160 kVA)
User Manual (Low Voltage)
Item
ModbusRTU
Figure 4-21 Battery System
Item
SmartLi start
address
Issue 05 (2024-01-30)
Description
Refers to a Modbus protocol
based on the RS485 bus used
to connect to the NetEco.
Disable: The Modbus RTU
services are unavailable.
Read-only: Only the read
permission is enabled. Settings
are not allowed.
NetEco: The read permission
and the write permission on
related parameters supported
by the NetEco are enabled.
Enable: All functions are
available.
Description
Specifies the SmartLi
communication address when
the UPS queries SmartLi data.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 User Interface
Default Value Range
Value
Enable Disable,
Enable, Read-
only, NetEco
Default Value
Value Range
80 -
116