Huawei UPS5000-E-60K-F60 User Manual page 119

UPS5000-E-(60 kVA-160 kVA)
User Manual (Low Voltage)
Item
Parity mode
Stop bit
Northbound
protocol type
Figure 4-15 ModbusTCP Settings
Item
ModbusTCP
encryption
Issue 05 (2024-01-30)
Description
Specifies the RS485
communication frame
composition bit. When device
nodes use RS485
communication, set the
parity modes for the device
nodes to the same mode.
Specifies the stop bit in the
Modbus communication
frame format. When the UPS
is connected over the serial
port Modbus, set this
parameter based on the
frame format that the
upstream device Modbus
supports.
Specifies the northbound
protocol type.
Description
If Modbus TCP is used for
communication,
communications links do not
implement encryption or
implement encryption based
on the selected encryption
mode.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 User Interface
Default Value Value Range
None None, Odd,
Even
1 1–2
ModbusRTU ModbusRTU,
YDN
Default Value Value Range
Enable Disable,
Enable
111