Huawei UPS5000-E-60K-F60 User Manual page 111

UPS5000-E-(60 kVA-160 kVA)
User Manual (Low Voltage)
Figure 4-5 Runn Info screen 2
Table 4-3 AC Output
Item
Phase voltage (V)
Line voltage (V)
Phase current (A)
Frequency (Hz)
Power factor
Table 4-4 UPS Load
Item
Current crest factor
Load ratio (%)
Active power (kW)
Apparent power (kVA)
Issue 05 (2024-01-30)
NO TE
● If the battery type is lead-acid battery and Number of iBOXs in System Info > Settings
> iBOX Settings > Basic Param. is not 0, Battery System is displayed on the Runn.
Info. screen.
● If Current equalization detection in Monitoring > UPS System > Running Parameter
> Output Setting on the WebUI is set to Enable, and the number of inverter modules is
greater than or equal to 2, Mod. Cur. Eql. Data is displayed on the Runn. Info. screen.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Description
AC output phase voltage
AC output line voltage
AC output phase current
AC output frequency
Proportion of output active power to output
apparent power
Description
Proportion of the peak value of load current to
the RMS value
Load rate of each phase on the UPS, that is, the
proportion of the actual power to the rated power
Output active power of each phase on the UPS
Output apparent power of each phase on the UPS
4 User Interface
103