DLP Projector - User Manual
Using the Projector
Using On-Screen Display
Using the On-Screen Display
The projector has an On-Screen Display (OSD) that lets you make image adjustments, change various settings
and check the projector's current status.
Navigating the OSD
You can use the remote control or the control buttons on the projector to navigate and make changes to the OSD.
The following illustration shows the corresponding buttons on the remote control and on the projector.
1. To open the OSD, press the Menu button on the OSD control
panel or remote control. There are six folders on the menu.
Press the ◄ or ► buttons to move through the submenus or
secondary menus.
2. Press the ▲or▼ button to select the option and ◄ or ►
button to change values for settings. Press
the new setting.
3. Press MENU to leave a submenu or EXIT to close menu.
UM90570802EN00
to confirm
38