Table of Contents
Advertisement
DLP Projector - User Manual
OSD Menu – SETTINGS
Power Management
Standby Mode: Switch standby power mode.
Auto Power Off: This function is set to OFF by default. When it is set to ON and no input signal is received
within 20 minutes, the projector will turn off automatically.
Auto Power On: This function is set to OFF by default. When it is set to ON, the projector will turn on
automatically when the AC power is turned on the next time. You can use this function and the power switch
(instead of the remote control) to turn on the projector. Set this function to OFF if it's unnecessary.
Image Latency
This function allows you to set image latency. Note that normally the image latency should be set to Normal for
best picture quality.
Normal: Set image latency to 2 frames.
Fast: Set image latency to less than 1.5 frames.
Blank Screen
User can use this function to specify the image displayed on the blank screen when there is no input signal. The
selectable items are Logo, Black and Blue, the default setting is Logo.
OSD Settings
Startup Logo: Press ENTER button, and use the ◄ or ► button to turn on / off the Startup Logo.
Menu Position: Adjust menu position through this function. The available position options are at Top-Left,
Top-Right, Bottom-Left, Bottom-Right and center of the screen.
Menu Transparency: Changes the transparency of OSD Menu. The background color of the OSD can be
adjusted from a darker solid color to a lighter transparent color.
Time Out: Set up the timer to exit OSD menu. The available options are Always On, 10 Seconds, 30 Seconds
and 60 Seconds.
Message Box: This function allows you to disable the pop-up message on the bottom-right of the screen.
Menu Rotation: Adjust menu position through this function. The available position options are at Off, Clockwise,
Counterclockwise of the screen.
UM90570802EN00
59
Advertisement
Table of Contents
