DLP Projector - User Manual
LED Indication
Several indicators messages are used to display the current projector status or alert the abnormal message.
TEMP LED Indicator
LED Color and Status
Off (No color)
RED, continuous flashing.
LIGHT LED Indicator
LED Color and Status
Off (No color)
ORANGE, solid on.
GREEN, solid on.
GREEN, repeat flash 1 time.
RED, repeat flash 1 time.
RED, repeat flash 2 times.
STATUS LED Indicator
LED Color and Status
Off (No color)
ORANGE, repeat flash 2 times.
GREEN, repeat flash 2 times.
RED, repeat flash 1 time.
RED, repeat flash 2 times.
RED, repeat flash 4 times.
ORANGE, solid on.
RED, solid on.
POWER LED Indicator
LED Color and Status
Off (No color)
GREEN, continuous flashing.
ORANGE, continuous flashing.
RED, solid on.
ORANGE, solid on.
GREEN, solid on.
UM90570802EN00
Pattern Sequence
Pattern Sequence
Pattern Sequence
Pattern Sequence
Condition Description
No Error
Temperature Error
Condition Description
Light source is off.
Light source be run on Forced Eco mode when high
temperature.
Light source is normal running.
Light source is temporary off by SHUTTER ON
(Closed).
Light source can't be ignited when warm up phase.
Light source be extinguished during normal operation.
Condition Description
No Error
Request to re-execute the Lens Calibration process.
Lens calibration is processing.
Cover Error
TEC/Color sensor Problem
Fan Error
Firmware Upgrade mode
System Error
Condition Description
AC Power is off
Projector is powering up
Projector is cooling down to standby mode
Standby Mode: Power Saving without network
control capability
Standby Mode: with Network control capability.
Projector is power on
70