Table of Contents
Advertisement
DLP Projector - User Manual
Rotate the projected image within active display area.
Use the ◄ or ► button to rotate the image clockwise or counterclockwise.Select Reset option to return
Rotation setting to default value. Note that the image size is shrunk for projecting full image when Rotation is
enabled; please refer to below illustration for adjustable range.
-100 (-25∘)
Lens Throw Ratio
Throw ratio is the ratio of the distance from the throw (the lens to the screen) to the projector screen's width.
The larger the smaller the throw ratio, the closer you can place the projector to the screen or wall.
Reset:
Reset all of settings under this option to the default value.
Note:
Above adjustable range is for the case you adjust single dimension, the adjustable range of H and V
Keystone combination is narrow if comparing with single- dimension adjustment.
4 Corner
In some applications, the distortion at the corner may occur due to the installation or projected surface.
In this case, you can use Conner adjustment to correct the distortion corner by corner. Please refer to below
illustrations
Top-Left Corner
Horizontal
-192 (Pixiels)
Vertical
-120 (Pixiels)
UM90570802EN00
0
0
0
26
-100 (-25∘)
192 (Pixels)
120 (Pixels)
Advertisement
Table of Contents
