DLP Projector - User Manual
Connecting Equipment
Follow the instructions below to connect the DU9057Z projector to a video source or external control equipment
(if any). When connecting to the equipment, use the correct signal cable to connect to the signal source and
ensure that the cable is securely connected. Fasten the nut on the joint and connect the signal source equipment
to the projector according to the image below.
Connecting a Computer
Connect the PC signal to be projected to the projector through the DVI-D, HDMI cable.
Connecting a Video Device
Connect video equipment to the input port of the projector via the DVI-D, HDMI Connector.
UM90570802EN00
34