Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vivitek DU9900Z
Summary of Contents for Vivitek DU9900Z
- Page 1 User's Manual User's Manual 900Z...
-
Page 2: Table Of Contents
DU9900Z DLP Projector - User Manual Table of Contents Copyright ....................................3 Copyright ..................................3 Disclaimer ..................................3 About the Manual ................................3 Important Safety Guidelines ..............................4 Safety Notification ................................4 Installation and Use Notices ............................6 Disposal of Old Electric and Electronic Equipment ......................6 Important Recycling Instructions ............................ - Page 3 DU9900Z DLP Projector - User Manual OSD Menu – INPUT ..............................43 OSD Menu – PICTURE ..............................46 OSG Menu – ALIGNMENT ............................48 OSD Menu – CONTROL .............................. 51 OSD Menu – SERVICE ..............................55 Product Specification ................................56 Supported Signal Input Timing ............................
-
Page 4: Copyright
No duplication of the manual or any content included in the manual is allowed without the written consent of the manufacturer. © 2017 Vivitek. Vivitek is a trademark of Delta Electronics, Inc. © All rights reserved. 2017 Disclaimer The information in the manual is subject to change without notice. -
Page 5: Important Safety Guidelines
If the above scenario occurs, the user may be responsible for correcting the interference WARNING! Changes or modifications without approval from Vivitek could void the user’s authorization to operate the product. UM99000721EN00... - Page 6 DU9900Z DLP Projector - User Manual LIGHT MODULE A light module containing multiple laser diodes acts as the light source in the product. These laser diodes are sealed in the light module. It is recommended to ask dealer for maintenance or repair services of the light module.
-
Page 7: Installation And Use Notices
DU9900Z DLP Projector - User Manual Installation and Use Notices Read and keep this manual properly. Pay attention to all the noted warnings, and follow all the guidelines and descriptions in this manual. Do not use the projector near water. -
Page 8: Introduction
You can find the latest version of the Manual and the manual of other Vivitek products on www.vivitekcorp.com. Packing Checklist The following items are included in the packaging box of the DU9900Z series projector. If there is any loss or damage to any item, contact your dealer or Vivitek customer service department. -
Page 9: Projector Overview
DU9900Z DLP Projector - User Manual Projector Overview Front-left View 1. Front IR Receiver The Receiver is for IR signals from the remote control. 2. LED Indicator Display current projector status such as power, light source status and warning. 3. Lens Mounting Hole The mounting hole is for installing the projection lens. - Page 10 DU9900Z DLP Projector - User Manual Bottom View 13. Ceiling Mounting Hole Total, six M6 screw holes with maximum depth of 16mm 14. Recess for projector handling. These four recesses can be used for handling the projector. Caution: When installing, ensure that you use only UL Listed ceiling mounts. Contact your dealer for information on mounting the projector on a ceiling.
-
Page 11: Io Panel
DU9900Z DLP Projector - User Manual IO Panel TRIGGER (12V +/-1.5V) HDBaseT/LAN When connected to the screen through a 3.5mm cable, Connect an Ethernet cable (Cat5/Cat6, not supplied) the screen deploys automatically on startup of the from a computer, network device, or HDBaseT projector. -
Page 12: Control Panel
DU9900Z DLP Projector - User Manual Control Panel POWER CENTER LENS User the button to turn on/off the projector. Push the button to center the lens and calibrate the parameter of lens shift. INPUT Note: The lens position needs to be calibrated for the Push the button to select the input signal. -
Page 13: Remote Control
DU9900Z DLP Projector - User Manual Remote Control Use the button to turn on the projector. Use the button to turn off the projector. FOCUS Adjust the focus of the projected image. ZOOM Zoom in/out the projected image. TEST PATTERN Use the button to show the test pattern. - Page 14 DU9900Z DLP Projector - User Manual 3G-SDI Select 3G-SD as the input source. DisplayPort Select DisplayPort as input source. HDBaseT Select HDBaseT the input source. Wired Remote Jack CLEAR Connect to WIRED REMOTE terminal Erase the set ID number of the remote control; refer to the section “Using on the projector Control ID for Multi-projector Application”.
-
Page 15: Installation And Setting Up
DU9900Z DLP Projector - User Manual Installation and Setting up Inserting or Changing the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the direction of the arrow. 2. Place two AA batteries with the correct polarity. -
Page 16: Installing The Projector
DU9900Z DLP Projector - User Manual Installing the Projector The high quality display effect can be guaranteed only when the projector is correctly installed. Generally, the light source facing the screen should be reduced or eliminated as much as possible. The contrast of the image will be obviously reduced if the light directly shines on the screen, such as the beam from windows or the searchlight cast on the image. -
Page 17: Mounting The Projector
DU9900Z DLP Projector - User Manual Mounting the Projector For mounting the projector, please use UL Listed ceiling mounts and M6 screws, maximum depth of screw is 16 mm. 6 mounting holes M6*1,Max. length L=16 UM99000721EN00... -
Page 18: Installing Or Removing The Optional Lens
DU9900Z DLP Projector - User Manual Installing or Removing the Optional Lens Caution: Do not shake or place excessive pressure on the projector or the lens components as the projector and lens components contain precision parts. When shipping the projector with the optional lens, remove the optional lens before shipping the projector. - Page 19 DU9900Z DLP Projector - User Manual Removing the Existing Lens Push the LENS RELEASE button all the way in and rotate the lens counterclockwise. The existing lens will be disengaged Pull out the existing lens slowly. Important: When installing the lens into the projector, be sure to remove the lens cap from the back of the optional lens before installing the optional lens into the projector.
-
Page 20: Connecting To Ac Power Supply
DU9900Z DLP Projector - User Manual Connecting to AC Power Supply The AC power cord is included in the box; plug the power cord to the AC socket on the IO panel. Important: When the input voltage is 110V, the current supplied by the power supply does not provide the current required to run the projector at full power. -
Page 21: Turning Off The Projector
DU9900Z DLP Projector - User Manual Turning Off the Projector Once the projector is no longer required, it is important to shut it down correctly to avoid damage or unnecessary wear and tear on the device. Important: Do not unplug the power cable from the wall outlet or projector when the projector is powered on. -
Page 22: Adjusting The Projection Mode
DU9900Z DLP Projector - User Manual Adjusting the Projection Mode DU9900Z is designed for set up in all angles including desktop, ceiling, portrait and free-tilt installation as shown in the below illustration. You can change the direction of the image using the Projection Mode. The projector has a smart cooling mechanism, which regulates the fan automatically according to the projection mode. -
Page 23: Adjusting The Projected Image Position
Adjusting the Projected Image Position The DU9900Z projector has the powered lens shift feature; the image can be shifted vertically or horizontally without moving the projector. The lens shift range is shown in the percentage of the image height and width, the maximum vertical shift range can be up to 50% of the projected image height and down to 50% of the height, and maximum horizontal shift range is 15% of the image width to right and left. -
Page 24: Adjusting Geometric Distortion
When the image is projected on a curved surface or screen at an angle, the image may become distorted. You can utilize the latest Vivitek Geometric Correction engine to make an image look visually correct when it is projected onto a non-planar screen or at an angle. -
Page 25: Rotation
DU9900Z DLP Projector - User Manual Reset: Reset all of settings under this option to the default value. Rotation Rotate the projected image within active display area. Use the ◄ or ► button to rotate the image clockwise or counterclockwise.Select Reset option to return Rotation setting to default value. -
Page 26: Arc
DU9900Z DLP Projector - User Manual Rotation Below is an example of using Rotation Note: H or V Keystone is available when Horizontal or Vertical of Pincushion/Barrel is adjusted. Rotation is available when H or V Keystone is adjusted. -
Page 27: Corner Adjustment
DU9900Z DLP Projector - User Manual Left -150 (-30%) 150 (30%) Corner Adjustment In some applications, the distortion at the corner may occur due to the installation or projected surface. In this case, you can use Conner adjustment to correct the distortion corner by corner. Please refer to below illustrations... - Page 28 DU9900Z DLP Projector - User Manual Bottom-Left Corner Horizontal -192 (Pixels) 192 (Pixels) Vertical -120 (Pixels) 120 (Pixels) Bottom-Right Corner Horizontal -192 (Pixels) 192 (Pixels) Vertical -120 (Pixels) 120 (Pixels) Custom Warp: Apply the geometry adjustment using a PC projector tool.
-
Page 29: Preventing Unauthorized Use Of The Projector
DU9900Z DLP Projector - User Manual Preventing Unauthorized Use of the Projector Using the Control Panel Lock This function allows you to lock the control panel on the projector to prevent the unauthorized operation of the control buttons. Locking the Control Buttons Select CONTROL->OSD Settings->... -
Page 30: Using The Security Lock
DU9900Z DLP Projector - User Manual Unlocking the Control Panel Once Control Panel Lock is enabled, all of control buttons on the projector are disabled. Please enter the OSD option CONTROL>OSD Settings>Control Panel Lock then select Off to unlock the control panel by remote control. - Page 31 DU9900Z DLP Projector - User Manual Password Register Password Confirm Password Menu = Cancel Control Panel Lock is turned on, the pop-up message will be shown Lock as below, select OK to confirm or Cancel to ignore the setting. When you turn on the projector next time, the pop-up window will remind you to input the password to start the projection.
-
Page 32: Using Control Id For Multi-Projector Application
DU9900Z DLP Projector - User Manual Using Control ID for Multi-Projector Application When installing more than one projector in the room, the projectors may receive the control signal at the same time. In this case, you can use control ID function to specify the identification of the projector and remote control to operate the specified projector. - Page 33 DU9900Z DLP Projector - User Manual Erase the identification number of the remote control The set ID number is overwritten if new ID number is set, you can press ID SET and CLEAR button to erase ID number of the remote control.
-
Page 34: Using The Constant Brightness Function To Maintain The Brightness Output
The brightness output of a projector may decline after thousands of hours of usage. In certain applications, such as mapping, a periodical adjustment to multiple projectors is required to ensure the overall image result. Vivitek’s Constant Brightness feature is designed to reduce the need for installers to regularly recalibrate the projectors. A built-in light sensor... -
Page 35: Connecting Equipment
Connecting Equipment Follow the instructions below to connect the DU9900Z projector to a video source or external control equipment (if any). When connecting to the equipment, use the correct signal cable to connect to the signal source and ensure that the cable is securely connected. -
Page 36: Connecting To A Control Equipment
DU9900Z DLP Projector - User Manual Connecting to a Control Equipment The projector has the following control port for connecting to the control equipment: HDBaseT/LAN (Network control): The projector supports network control. LAN and HDBaseT share the same port. If only network control is used, you can connect the LAN on the projector to PC or through the local network. -
Page 37: Connecting A Screen Trigger
DU9900Z DLP Projector - User Manual Connecting a Screen Trigger If your projection system includes a electric projection screen and other 12V trigger device, you can connect these devices to the projector’s 12V trigger output port to configure the 12V signal settings. The projector will output 12V signals when it’s turned on. -
Page 38: Connecting An Hdbaset Transmitter
RJ-45 cable. If the HDBaseT Transmitter you purchased supports the input and output of the IR remote control, the control signals from the IR remote control can be sent to the DU9900Z projector via the RJ-45 cable. -
Page 39: Using The Projector
DU9900Z DLP Projector - User Manual Using the Projector Using On-Screen Display Using the On-Screen Display The projector has an On-Screen Display (OSD) that lets you make image adjustments, change various settings and check the projector’s current status. Navigating the OSD You can use the remote control or the control buttons on the projector to navigate and make changes to the OSD. -
Page 40: Menu Tree
DU9900Z DLP Projector - User Manual Menu Tree Use the following table to quickly find a setting or determine the range for a setting. Main Menu Submenu INPUT Input Selection HDMI1 HDMI2 Component / BNC DisplayPort 3G-SDI HDBaseT PIP Option... - Page 41 DU9900Z DLP Projector - User Manual Sharpness Noise Reduction Color Temperature 5400K 6500K 7500K 9300K Native Color Gamut REC709 SMPTE Native Gamma 2.35 S-Curve DICOM Input Balance Red Offset Green Offset Blue Offset Red Gain Green Gain Blue Gain Hue/Saturation/Gain...
- Page 42 DU9900Z DLP Projector - User Manual Digital Zoom Digital Zoom Digital Pan Digital Scan Reset Warp Keystone Horizontal/Vertical/Rotation/Reset Rotation Rotation /Reset Pincushion/Barrel H Pin/Barrel V Pin/Barrel H keystone V keystone Rotation Reset Top/Bottom/Left/Right/Reset Top Left Corner Horizontal/Vertical/Reset Top Right Corner...
- Page 43 DU9900Z DLP Projector - User Manual Channel 3 Channel 4 Channel 5 Art-Net Channel Status Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Light Power Light Power Eco / Normal / Custom Custom Power Level Constant Brightness Off / On...
-
Page 44: Osd Menu - Input
DU9900Z DLP Projector - User Manual OSD Menu – INPUT Input Selection Use the shortcut key on the remote control or this function to select the input source. The Input options are as below. The available input source of the product is HDMI 1, HDMI 2, DisplayPort, VGA, Component (BNC), HDBaseT, DVI-D and 3G-SDI. - Page 45 DU9900Z DLP Projector - User Manual Position Find preferred location of PIP window. Top Left: Display sub picture at top left of the screen. Bottom Left: Display sub picture at bottom left of the screen. Top Right: Display sub picture at top right of the screen.
- Page 46 DU9900Z DLP Projector - User Manual This function is to set the 3D format and sync method. The projector detects the type of input signals and provides relevant options for settings. Before performing 3D setting, make sure that the input signal is connected.
-
Page 47: Osd Menu - Picture
DU9900Z DLP Projector - User Manual OSD Menu – PICTURE Picture Mode Use ◄or► to select desired picture mode High Bright: The highest brightness output mode is suitable for the application where the highest brightness output is needed. Presentation: The best projection effect is suitable for the presentation or picture. - Page 48 DU9900Z DLP Projector - User Manual Gamma When the ambient light is so bright that may affect the projection of the details in the dim area of the image, you can change the gamma to adjust the chrominance. The available options are 1.0, 1.8, 2.0, 2.2, 2.35, 2.5, S-Curve and DICOM.
-
Page 49: Osg Menu - Alignment
DU9900Z DLP Projector - User Manual OSG Menu – ALIGNMENT Lens Lock This function can be used to disable lens control for preventing unauthorized operation or disoperation in lens control related functions and includes: Lens Shift, Zoom/Focus adjustment and Center Lens. It is recommend to turn on Lens Lock function to disable the Lens control after lens adjustment is done. - Page 50 DU9900Z DLP Projector - User Manual Digital Zoom Press ENTER button to enlarge the image or move the image. Digital Zoom: Use the ▲or ▼ button to enlarge the projected image. Digital Pan: Use the ▲or ▼ button to move the projected image horizontally. This function is only available when projected image is enlarged.
- Page 51 DU9900Z DLP Projector - User Manual Reset: All the settings toward blanking will set to default. Custom Masking: Apply the masking area drawn by PC projector tool. interpolation Warp Filter: Select manual or auto method to specify the horizontal/vertical LUT (Lookup Table) applied for regular geometry.
-
Page 52: Osd Menu - Control
DU9900Z DLP Projector - User Manual OSD Menu – CONTROL Language Select OSD language and choose from one of the 8 available languages options. Available lanaguges include: English, Français, Español, Deutsch, Português, 簡体中文, 繁體中文, 日本語, 한국어. Projection Mode Use the ◄ or ► buttons to select a projection mode to change the direction of the image. The selectable options are as follows: Auto-Front: One orientation sensor is built in the projector. - Page 53 DU9900Z DLP Projector - User Manual Auto Power Off This function is set to OFF by default. When it is set to ON and no input signal is received within 20 minutes, the projector will turn off automatically. Auto Power On This function is set to OFF by default.
- Page 54 DU9900Z DLP Projector - User Manual Constant Brightness: Select On to enable this function. A built-in light sensor inside the projector monitors the level of light so that when a reduction in light is detected, the sensor will regulate dynamically the electricity power to increase the light output for your pre-defined brightness level, and thus maintaining a constant level of brightness.
- Page 55 DU9900Z DLP Projector - User Manual Security Lock: Avoide unauthorized personnel to operate the projector. Refer to " page 29 ,Using the Security Lock " for detail message. Image Latency This function allows you to set image latency. Note that normally the image latency should be set to Normal for best picture quality.
-
Page 56: Osd Menu - Service
DU9900Z DLP Projector - User Manual OSD Menu – SERVICE Model Display the project model name. Serial Number Display the serial number of the projector. Software Version 1 / Software Version 2 Display the software version in the projector. Control/Remote ID Display current projector ID and remote control ID number. -
Page 57: Product Specification
DU9900Z DLP Projector - User Manual Product Specification Display Type Single Chip 0.96" DLP Technology **Brightness 20,000ANSI, 22,000 ISO Lumens Native Resolution WUXGA (1920 x 1200) Maximum Resolution WUXGA (1920 x 1200)@60Hz (Reduced Blanking) Contrast Ratio 10,000:1 with Electronic DB... -
Page 58: Supported Signal Input Timing
DU9900Z DLP Projector - User Manual Supported Signal Input Timing HDMI / HDBaseT Signal H Freq. Frame PCLK Resolution DisplayPort HD/SDI/3G Format (KHz) Rate (Hz) (MHz) 8-bit 10-bit 12-bit 640x480 31.469 59.94 25.175 640x480 37.500 74.99 31.500 ... - Page 59 DU9900Z DLP Projector - User Manual HDMI / HDBaseT Signal H Freq. Frame PCLK Resolution DisplayPort HD/SDI/3G Format (KHz) Rate (Hz) (MHz) 8-bit 10-bit 12-bit Apple 640x480 35.000 66.67 30.240 832x624 49.720 74.55 57.280 ...
- Page 60 DU9900Z DLP Projector - User Manual Supported 3D Signal Output V-Freq H-Freq HDMI1/2 DisplayPort Display Standard Resolution V-Total DisplayPort Remarks (Hz) (kHz) (*1) (*2) Frame (*3) Rate 720p50 Frame Packing 1280x720 50.00 1470 37.50 720p59 Frame Packing 1280x720 59.94...
-
Page 61: Configurations Of Terminals
DU9900Z DLP Projector - User Manual Configurations of Terminals DVI-D Terminal VGA Terminal ( D-sub 15 pin) T.M.D.S. Data 2- Input Input T.M.D.S. Data 2+ Input Red Input Ground Ground Green Input Blue Input T.M.D.S. Data 0- Input VGA_SDA T.M.D.S. Data 0+ Input... -
Page 62: Du9900Z Lens Series
DU9900Z DLP Projector - User Manual HDBaseT/LAN Terminal (RJ-45) 3D Sync Out Signal Ground Ground Ground DU9900Z Lens Series Five types of optional electric lenses are available for the projector and are listed in the below table. Contact an authorized Vivitek dealer for additional details. -
Page 63: Product Dimensions
DU9900Z DLP Projector - User Manual Product Dimensions 6 mounting holes M6*1,Max. length L=16 UM99000721EN00... -
Page 64: Led Indication
DU9900Z DLP Projector - User Manual LED Indication Several indicators messages are used to display the current projector status or alert the abnormal message. POWER LED Indicator LED Color and Status Pattern Sequence Condition Description Off (No color) AC Power is off GREEN, continuous flashing. -
Page 65: Common Problems And Solutions
DU9900Z DLP Projector - User Manual Common Problems and Solutions These guidelines provide tips to deal with problems you may encounter while using the projector. If the problem remains unsolved, contact your dealer for assistance. Often the problem is something as simple as a loose connection. Check the following before proceeding to the problem-specific solutions. - Page 66 DU9900Z DLP Projector - User Manual 4. Check if Blank or Shutter function is enabled Remote Control Problems Problem: The projector does not respond to the remote control. 1. Direct the remote control towards remote sensor on the projector. 2. Ensure the path between remote and sensor is not obstructed.
-
Page 67: About The Vivitek Support
DU9900Z DLP Projector - User Manual About the Vivitek Support If you cannot find solutions from this user guideline, please contact us using the contact information below: Europe, Middle East and Africa Vivitek Service & Support Zandsteen 15 2132 MZ Hoofddorp...