DLP Projector - User Manual
Remote Control
UM90570802EN00
On
Use the button to turn on the projector.
OFF
Use the button to turn off the projector.
FOCUS
Adjust the focus of the projected image.
ZOOM
Zoom in/out the projected image.
TEST PATTERN
Use the button to show the test pattern. Press this button again to
switch to the next pattern. Press the EXIT button to return to the
projected image.
LENS SHIFT
Use the button to move the lens right or left.
ENTER
Use the button to select settings or confirm the changed settings.
MENU
Press the button to display or hide the OSD Menu.
EXIT
Press the button to return to the previous Menu or exit the OSD Menu.
AUTO PC
You can use this function to execute signal source auto
synchronization
BLANK
Press the button to temporarily interrupt the projection.
STATUS
Show OSD MENU – SERVICE.
VGA
NA.
COMPONENT
NA.
ASPECT
Press the button to display aspect ratio options.
HDMI1
Select HDMI 1 as the input source.
HDMI2
Select HDMI 2 as the input source.
DVI
Select DVI-D as the input source.
14