Osg Menu - Alignment - Vivitek DU9057Z User Manual

DLP Projector - User Manual
OSG Menu – ALIGNMENT
Aspect Ratio
This function allows the user to adjust the aspect ratio of the projection image by the ◄ or ► button.
Projection Mode
Use the ◄ or ► buttons to select a projection mode to change the direction of the image. The selectable options
are as follows:
Auto-Front: One orientation sensor is built in the projector. In front projection installation, you can select this
option to flip the projected image automatically.
Front Desktop: Install the projector on the desktop and project the image forward.
Rear Desktop: Install the projector on the desktop and project the image from the rear of the screen.
Front Ceiling: Mount the projector on the ceiling and project the image forward.
Rear Ceiling: Mount the projector on the ceiling and project the image from the rear of the screen.
Digital Zoom
Press ENTER button to enlarge the image or move the image.
Digital Zoom: Use the ▲or ▼ button to enlarge the projected image.
Digital Pan: Use the ▲or ▼ button to move the projected image horizontally. This function is only available
when projected image is enlarged.
Digital Scan: Use the ▲or ▼ button to move the projected image vertically. This function is only available when
projected image is enlarged.
Reset: The setting will be reset to default value.
Overscan
Noise may appear on the edge of the projected image or image may be smaller than projected image, select
below option to hide the noise or extend the image.
Off: Display the original image.
Crop: Hide the edge of the image
Zoom: Extend the image to fit the projected area as possible.
UM90570802EN00
51