Table of Contents
Advertisement
DLP Projector - User Manual
Important Safety Guidelines
Thank you for purchasing this high quality product!
Read the Manual carefully to obtain the best performance. The Manual provides instructions on how to use the
menu and implement the operation.
Safety Notification
To turn off the main power, ensure to unplug from the power outlet.
To prevent electric shock, do not open the cabinet. There are high-voltage components inside.
Refer service to qualified service personnel.
The symbol warns the user about electric shock caused by voltage not insulated. Therefore, it is
dangerous to make any kind of contact with any parts inside the projector.
To prevent the projector from electrical discharge or electric shock, do not expose the projector to
rain or moist environment. Do not use the plug with an extension cord or an outlet unless all the
prongs can be fully inserted.
This symbol alerts the user that important information which should be read carefully to avoid
problems concerning the operation and maintenance of the projector.
WARNING TO CALIFORNIA RESIDENTS:
Handling the cables supplied with this equipment might expose user to a little lead, a chemical known to the Stage
of California, resulting in risks of barrenness. Please remember to wash hands after handling.
NOTIFICATION (CANADA)
This Class A digital equipment complies with Canadian ICES-003.
CE NOTIFICATION
This is a Class A product, which complies with rules for CE marking. This product may cause radio interference
that the user may be supposed to take adequate measures.
FCC NOTIFICATION
This device complies with part 15 of the FCC Rules. The operation is subject to the following two conditions:
(1) This device may not cause harmful interference;
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with part 15 of the FCC Rules. These requirements are
designed to provide reasonable protection against harmful interference when the equipment operates in a
commercial environment. This equipment might generate radio frequency energy. If user does not install or use in
accordance with the instructions in manual, the radio frequency energy may interfere radio reception. If the above
scenario occurs, the user may be responsible for correcting the interference
WARNING!
Changes or modifications without approval from Vivitek could void the user's authorization to
operate the product.
UM90570802EN00
4
Advertisement
Table of Contents
