Projector Overview - Vivitek DU6693Z-WH User Manual

DU6693Z DLP Projector - User Manual

Projector Overview

Front-right View
1 2
3
4
5
6
Rear-right View
Important:
 The air passes through grill openings on the projector is for good air circulation. Do not obstruct any of
the grill openings and keep the required distance from any object.
UM66931217EN00
8
1. Front IR Receiver
2. LED Indicator
3. Air Intake
4. Lens Release Button
5. Lens hood
6. Height Adjuster
7
7. Intake Vent
8. Rear IR Receiver
9. I/O Connector Panel
14
10. Kensington Lock
11. Slide Switch
12. AC Power Switch
13. AC Inlet
10
11
13
12
9 14. Control Panel
The Receiver for IR signals from the remote control.
Display current projector status such as power, light source
status and warning.
The fan pulls the cool air to the projector for system cooling.
Press the Lens Release button before removing the lens.
Remove the cover before installing the lens.
Adjust level of projector
The fans pull air to cool the radiator of the projector.
The Receiver for IR signals from the remote control.
Connect to various input, control or output terminals to the
projector.
Attach the projector to a permanent object with the Kensington
slot and a security cable.
Switch it to corresponding input voltage
Turn on/off the AC power of the projector.
Connect the supplied power cable to this inlet.
Press the button to operate the OSD menu or adjust the lens
Settings see OSD controls.
8