Cleaning The Device; Calibrating The Device - Benning ST 755+ Operating Manual

Maintenance

10.3 Cleaning the device

10.3 Cleaning the device
Clean the device regularly and as the need arises.
Requirements
• A clean and dry cloth or special cleaning cloth
NOTICE
Wrong cleaning agents
Using the wrong cleaning agents can damage the device.
• Do not use any solvents, abrasives or polishing agents.
Procedure
Clean the exterior of the device with a clean and dry cloth or a special cleaning cloth.
10.4

Calibrating the device

Benning guarantees compliance with this technical and accuracy specifications stated in this
operating manual for the first 12 months after the delivery date.
To maintain accuracy of the measuring results, make sure that the device is recalibrated in
annual intervals by the BENNING Service [} page 12].
As part of a calibration, the device is provided with the latest firmware update and thus always
remains up to date.
http://calibration.benning.de
5284 / 08/2023 en BENNING ST 755+ / ST 760+ 97