Setting The Device Data; Managing The Network Settings; Table 21 Network Settings - Benning ST 755+ Operating Manual

8.2

Setting the device data

The "Device data" menu is intended to show and hide test sample properties.
Menu
"Settings > System settings > Device data"
Setting options
Use the slider (ON/OFF) to enable and disable the displayed test sample properties in the list
[} page 66]. Enabled parameters are displayed and available for being selected. Disabled
parameters are hidden.
8.3

Managing the network settings

The "Network" menu is intended to manage and display the network settings.
Menu
"Settings > Network"
Setting options
Changes in the network settings will only take effect after the device has been restarted.
Menu
Information
Host name
LAN – IPv4
WLAN – IPv4
WLAN networks
Remote control
Table 21: Network settings
58
Parameter Description
Host name Gives an overview of the current network
configurations.
DHCP
Status
IP address
Subnet mask
Standard gateway
MAC address
DNS accessibility
Update server
accessibility
- Changes the current host name (device name). The
change of the host name only becomes effective after
restarting the device.
DHCP status Enabled: The device is automatically integrated into
an existing network.
IP address Can only be changed if DHCP is disabled.
Subnet mask
Standard gateway
- Manages the WLAN networks and connection
establishment.
- Enables remote access from the end device or PC to
the device.
BENNING ST 755+ / ST 760+
Configuration
8.2 Setting the device data
5284 / 08/2023 en