Operating The List View; Figure 4 General Operation; Table 8 Buttons In The Footer - Benning ST 755+ Operating Manual

General operation

6.5 Operating the list view

Button
All active
(device properties)
Reset
(device properties)
Reset
(test)
Check
(database)
Rename
Limits
(test)
Save
(limits)
Reset
(limits)
Overwrite
(limits)
Test procedure
Close
Table 8: Buttons in the footer
6.5 Operating the list view
Figure 4: General operation
1 Parameters (left side of the list view)
3 Smart menu – Device templates (test
sample templates)
5 Smart menu – Page selection
(exemplary)
7 Button in the footer (exemplary)
5284 / 08/2023 en
Description
Enables (ON) all parameters in the list.
Enables (ON) all parameters. The settings are saved automatically.
Deletes a faulty measured value during the ongoing test.
Checks the database for errors.
Opens an input window for assigning a new name.
Opens the limit settings and allows the modification of limits for the
active test [} page 60].
Stores modified limits temporarily [} page 36].
Resets all temporarily changed customer-specific limits to the default
limits (factory settings) [} page 36].
All changed limits are set permanently as new default limits
[} page 36].
Opens the "Test procedure" screen where the test procedure can be
adjusted individually.
Closes the opened database.
1 2
7
BENNING ST 755+ / ST 760+
3 4
6 5
2 Status messages/
selected parameter entry (right side of
the list view)
4 Smart menu (main menu)
6 Smart menu – Test standard selection
(exemplary)
8 -
29