Table 22 "Test Procedure" Screen - Benning ST 755+ Operating Manual

When you create or edit a test procedure, the "Test procedure" screen opens. The following
settings can be made for the individual test procedure:
Parameter
VDE
Protection class
Visual inspection
Connection test
RPE 600mA
RPE 10A
RInsu-1 / RInsu-IN
RInsu-2
RInsu-3
RInsu-4
RInsu-OUT
IPE
ICont
Funct.
Cable
Ua
PRCD
PRCD current intensity
Table 22: "Test procedure" screen
62
Description
Select the test standard.
Selects the protection class.
Enables / disables the visual inspection.
Enables /disables the connection test
[} page 40].
Enables /disables the protective conductor
resistance measurement with 600 mA.
Enables /disables the protective conductor
resistance measurement with 10 mA.
Enables / disables the insulating resistance
measurement.
Disables the protective conductor current
measurement or selects the measuring
method.
Disables the contact current measurement or
selects the measuring method.
Selects the measuring method for the
functional test.
Enables / disables the continuity test.
Enables / disables the output voltage
measurement.
Selects the PRCD type.
Selects the tripping current of the PRCD.
BENNING ST 755+ / ST 760+
Configuration
8.4 Managing the expert settings
5284 / 08/2023 en