Transport And Storage; Packing And Transport; Storage - Benning ST 755+ Operating Manual

4

Transport and storage

4.1

Packing and transport

Damage due to improper transport will result in exclusion of liability. Make sure that the
following measures are taken:
• Do not expose the device to shocks.
• If the device has been transported under conditions deviating from the operating
temperature or maximum relative air humidity specified in the Technical data [} page 100],
the device needs an acclimatisation phase of at least two hours before being switched on.
• Please keep the original packaging for later dispatch (e. g. for calibration).
• Dispatch the device in its original packaging only. Transport damages due to improper
packaging are excluded from warranty.
If the original packaging is no longer available, you can reorder it from the returns
management [} page 12]:
– Outer package (item no.: 10043820)
– Moulded parts (item no.: 10043821)
4.2

Storage

NOTICE
Improper storage
The device can be damaged due to improper storage.
• Follow the conditions for storage indicated.
Ensure the following measures during storage:
• Close the device case before storing the device.
• Store the device in a suitable location. Storage locations with the following conditions are
recommended:
– Dry and dust-free spaces
– No direct exposure to sunlight
– Keep away from chemical substances
• Do not store the device outdoors without protection.
• Ensure that the values in the technical data [} page 100] for the following ambient
conditions are adhered to at the storage location:
– Storage temperature
– Relative humidity (non-condensing)
• Condensation can form if there are large temperature fluctuations. Ensure that the
permissible value of 20 K per hour is not exceeded at the storage location.
• For optimum storage, the device case is equipped with an automatic pressure valve near
the carrying handle on the front of the device case.
20 BENNING ST 755+ / ST 760+
Transport and storage
4.1 Packing and transport
5284 / 08/2023 en