Table of Contents
Advertisement
Functions
7.5 General test procedure
7.5.1
Automatic testing
Automatic testing is primarily intended for periodic testing and tests after modification or repair
of test sample entries that have already been created [} page 76].
Depending on the test standard and protection class of the test sample, the device offers
preconfigured test procedures. When creating a test sample entry, a test procedure is assigned
to the test sample. This test procedure will be used and run during automatic testing.
Four different steps are used to manage databases, customers, departments and test samples.
The following functions can also be selected on the "Automatic test" screen:
Button
New
Change
Copy
Delete
Table 17: Functions of the "Automatic test"
Overdue test samples
The device determines overdue test samples based on their last test date and the set test
interval. To select a test sample that is overdue for testing, select a test sample using the
"Overdue devices" line.
Test sample entries that are overdue for testing can be filtered out using the "Overdue devices"
line. By default, the current date is entered as filter criterion. This setting shows you which test
samples are already overdue on the date entered and need to be tested again. By tapping the
"Overdue test samples" parameter, you can enter a future date that will show you test sample
entries that need to be tested until this future date.
5284 / 08/2023 en
Database
Customer
X
X
-
X
-
X
-
-
BENNING ST 755+ / ST 760+
Department
Test sample
ID no. / Overdue
devices
X
X
X
X
-
X
-
-
39
Advertisement
Table of Contents
