Operating The Test View; Figure 5 Test View - Benning ST 755+ Operating Manual

General operation

6.6 Operating the test view

6.6 Operating the test view
5
Figure 5: Test view
1 Selectable parameter
3 Display area for measurement details
5 Connection diagram
(Tap to enlarge the screen.)
Operating the test view
Button
Start
Stop
Pause
Next
Reset
Limits
Polarity reversal time
5284 / 08/2023 en
1
4
BENNING ST 755+ / ST 760+
2
3
2 Selected parameter entry
(Tap to open the selection window.)
4 Buttons for measurement-specific
settings for the duration of the test.
6 -
Description
Starts the test.
Automatic test: The test is stopped. The
"Automatic test" screen opens.
Manual test: The individual test is completed.
The intermediate view of measuring results is
displayed.
The measurement is paused.
Is used when changing the position of
terminals or test probes to avoid incorrect
measurement.
Continues the paused measurement.
Deletes incorrect measured values (only works
when the test is running).
The test duration is reset.
"Limits" [} page 60] and "Polarity reversal
time" [} page 40] can be changed for the
duration of the test.
31