Service Mode (Magicolor 2500W); Service Mode Entry Procedure; Toner Cartridge Removal Mode - Konica Minolta magicolor 2500W Service Manual

Field Service Ver. 1.0 Aug. 2006

12. Service mode (magicolor 2500W)

12.1 Service mode entry procedure

NOTE
• Ensure appropriate security for the service mode entry procedure. It should
NEVER be given to any unauthorized person.
12.1.1

Toner cartridge removal mode

• This mode is used for manually removing and/or replacing a specific color of toner car-
tridge or all four toner cartridges.
A. Procedure
1. Hold down the Cancel key for 10 seconds or longer.
2. With the Cancel key held down, hold down the Rotate Toner key for 10 seconds or
longer.
3. When all LED indicators are blinking rapidly, release the Cancel and Rotate Toner
keys.
4. Hold down the Rotate Toner key for another 10 seconds or longer.
5. The cyan toner cartridge moves into the proper position, so it can be removed.
6. Remove the cyan toner cartridge, if necessary.
7. Open and close the top cover. Each time you do this, another toner cartridge moves
into the proper position, so it can be removed in this order: cyan, black, yellow,
magenta.
12. Service mode (magicolor 2500W)
123